SMC TigerAccess Spezifikationen Seite 149
- Seite / 387
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
CLI Management Guide
TigerAccess™ EE
148 SMC7824M/VSW
To delete configured severity of alarm for STP guard, use the following command.
Command Mode Description
no snmp alarm-severity stp-
bpdu-guard
no snmp alarm-severity stp-
root-guard
Global Deletes configured severity of an alarm for STP guard.
7.1.9.8 Displaying SNMP Alarm Severity
To display configured severity of alarm, use the following command.
Command Mode Description
show snmp alarm-severity
Enable
Global
Bridge
Shows configured severity of alarm.
7.1.10 Displaying SNMP Configuration
To display all configurations of SNMP, use the following command.
Command Mode Description
show snmp
Enable
Global
Bridge
Shows all configurations of SNMP.
To deletes a recorded alarm in the system, use the following command.
Command Mode Description
snmp clear alarm-history Global Deletes a recorded alarm in the system.
7.1.11 Disabling SNMP
To disable SNMP, use the following command.
Command Mode Description
no snmp Global Disables SNMP.
When you use the no snmp command, all configurations of SNMP will be lost.
!
- Reason for Update 4
- Issue History 4
- Contents 5
- Illustrations 17
- 1 Introduction 20
- 1.3 Document Convention 21
- 1.4 Document Notation 21
- 1.5 Virus Protection 22
- 2 System Overview 23
- 2.1 System Features 24
- 3.1 Configuration Mode 26
- Command Description 32
- 3.3 Useful Tips 33
- 3.3.3 Using Abbreviation 36
- 4.1 System Connection 37
- 4.1.6.2 Security Level 41
- 4.1.8 Auto Log-out 45
- 4.1.9 Telnet Access 45
- 4.1.10 System Rebooting 46
- 4.2 System Authentication 48
- 4.2.4 RADIUS Server 49
- 4.2.5 TACACS+ Server 50
- 4.2.6 Accounting Mode 51
- 4.3 Configuring Interface 52
- 4.3.4 Interface Description 54
- 4.3.5 Displaying Interface 55
- 4.4 Secure Shell (SSH) 56
- 4.4.2 SSH Client 57
- 4.4.2.3 Authentication Key 58
- 4.5 802.1x Authentication 59
- 4.5.1 802.1x Authentication 60
- 4.5.1.3 Authentication Mode 61
- 4.5.1.4 Authentication Port 62
- 4.5.1.5 Force Authorization 62
- 4.5.7 Sample Configuration 66
- 5 Port Configuration 68
- 5.2.3 Transmit Rate 69
- 5.2.4 Duplex Mode 70
- 5.2.5 Flow Control 71
- 5.2.6 Port Description 71
- 5.2.7 Traffic Statistics 72
- 5.2.7.2 CPU Statistics 73
- 5.2.7.3 Protocol Statistics 74
- 5.2.8 Port Information 75
- 5.3 VDSL Port Configuration 76
- 5.3.2 Configuring VDSL Port 77
- 5.3.2.2 Enabling VDSL Port 78
- 5.3.2.5 PSD Level 84
- 5.3.2.6 PSD Mask Level 85
- 5.3.2.7 Interleave 85
- 5.3.2.10 Ham-band 88
- 5.3.2.11 SNR Margin 89
- 5.3.2.13 G.handshake Tone 92
- 5.3.4 Config-Profile 96
- 5.3.5 Configuring CPE 103
- 5.3.5.8 Duplex mode of CPE 108
- Feature Command 110
- 5.4 Port Mirroring 111
- 6 System Environment 113
- 6.1.3 Time Zone 114
- 6.1.6 Terminal Configuration 116
- 6.1.7 Login Banner 116
- 6.1.8 DNS Server 117
- 6.1.9 Fan Operation 118
- 6.1.11 FTP Server 118
- 6.1.12 FTP Client address 119
- 6.1.13 System Threshold 119
- 6.1.13.2 Port Traffic 120
- 6.1.13.3 Fan Operation 120
- 6.1.13.4 System Temperature 121
- 6.1.13.5 System Memory 121
- 6.2 Configuration Management 124
- 6.2.3 Auto-Saving 125
- 6.3 System Management 127
- 6.3.3 Tracing Packet Route 130
- 6.3.5 MAC Table 132
- 6.3.7 System Information 132
- 6.3.9 Running Process 133
- 6.3.12 Default OS 134
- 6.3.13 Switch Status 134
- 7 Network Management 136
- 7.1.3 SNMP Com2sec 138
- 7.1.4 SNMP Group 138
- 7.1.5 SNMP View Record 139
- 7.1.7 SNMP Version 3 User 140
- 7.1.8 SNMP Trap 140
- 7.1.8.2 SNMP Trap Host 141
- 7.1.8.4 Disabling SNMP Trap 142
- 7.1.8.5 Displaying SNMP Trap 143
- 7.1.9 SNMP Alarm 144
- 7.1.9.5 ADVA Alarm Severity 147
- 7.1.9.6 ERP Alarm Severity 148
- 7.1.11 Disabling SNMP 149
- 7.2.1 OAM Loopback 150
- 7.2.2 Local OAM Mode 151
- 7.2.3 OAM Unidirection 151
- 7.2.4 Remote OAM 151
- 7.3.1 LLDP Operation 153
- 7.3.2 Enabling LLDP 153
- 7.3.3 LLDP Operation Type 154
- 7.3.4 Basic TLV 154
- 7.3.5 LLDP Message 154
- 7.3.6 Reinitiating Delay 155
- 7.4 Remote Monitoring (RMON) 156
- 7.4.2 RMON Alarm 159
- 7.4.3 RMON Event 162
- 7.4.3.4 Event Type 163
- 7.5 Syslog 164
- 7.5.2 Facility Code 166
- 7.5.3 Syslog Bind Address 167
- 7.5.5 Disabling Syslog 167
- 7.6 Quality of Service(QoS) 169
- 7.6.1 How to Operate QoS 170
- 7.6.2 Packet Classification 172
- 7.6.2.4 Class Creation 175
- 7.6.3 Packet Conditioning 176
- 7.6.3.2 Packet Counter 177
- 7.6.3.4 Rate-limit 178
- 7.6.4 Rule Action 179
- 7.6.4.2 Metering 180
- 7.6.4.3 Policy Priority 186
- 7.6.4.4 Policy Action 186
- Packet Ingress 187
- Ingress Processing 187
- 7.6.5 Displaying Rule 191
- 7.6.6 Admin Rule 193
- 7.6.6.4 Class Creation 195
- 7.6.7 Admin Rule Action 196
- 7.6.7.3 Admin Policy Action 197
- 7.6.8 Displaying Admin Rule 198
- 7.6.9 Scheduling Algorithm 199
- 7.6.9.1 Scheduling Mode 201
- 7.6.9.2 Weight 201
- 7.6.9.5 Queue Status 203
- 7.6.9.6 Displaying QoS 203
- Start End 204
- Queue Length 204
- Probability 204
- Internet 206
- 7.8 Max New Hosts 207
- 7.9 Port Security 208
- 7.9.2 Port Security Aging 209
- 7.10 MAC Table 210
- 7.11 MAC Filtering 211
- 7.12.1 ARP Table 214
- 7.12.2 ARP Alias 215
- 7.12.3 ARP Inspection 216
- 7.12.4 Gratuitous ARP 221
- 7.12.5 Proxy-ARP 223
- 7.13 ICMP Message Control 224
- 7.14 TCP Flag Control 227
- 7.15 Packet Dump 227
- 7.15.3 Debug Packet Dump 229
- Packet sample 230
- Interface counter 230
- Packet samples 230
- 7.16.1 sFlow Service 231
- 7.16.2 Agent IP Address 231
- 7.16.5 Counter Interval 232
- 7.16.6 Sample Rate 232
- 7.16.7 Configuring Receiver 233
- 7.16.8 Receiver Index 234
- 7.16.9 Displaying sFlow 234
- 8 System Main Functions 235
- 8.1.1.1 Creating VLAN 237
- 8.1.1.2 Specifying PVID 237
- 8.1.1.4 Deleting VLAN 237
- 8.1.2 Protocol-based VLAN 238
- 8.1.3 MAC-based VLAN 238
- 8.1.6 VLAN Description 240
- 8.1.7 VLAN Precedence 241
- 8.1.10 Layer 2 Isolation 244
- 8.1.10.1 Shared VLAN 245
- 8.1.11 VLAN Translation 247
- 8.1.12 Sample Configuration 247
- Switch 1 Switch 2 249
- Outer Network 250
- Uplink Port 250
- 8.2 Link Aggregation 252
- 8.2.2.1 Configuring LACP 254
- 8.2.2.2 Operation Mode 255
- 8.2.2.3 Priority of Switch 255
- 8.2.2.4 Manual Aggregation 255
- 8.2.2.6 Administrational Key 256
- 8.2.2.7 Port Priority 257
- Switch A Switch B 258
- PC-A PC-B 258
- 8.3.1 STP Operation 259
- Blocking 262
- Listening 262
- Learning 262
- Forwarding 262
- Disabled 262
- 8.3.2 RSTP Operation 263
- 8.3.3 MSTP Operation 267
- 8.3.3.1 MSTP 268
- Region B (IST) 269
- Region A (IST) 269
- Region C (IST) 269
- 8.3.6.1 Path-cost Method 270
- 8.3.6.2 Edge Ports 271
- 8.3.6.4 Port Priority 272
- 8.3.6.5 Link Type 273
- 8.3.7 Configuring MSTP 274
- 8.3.7.3 Port Priority 275
- 8.3.7.4 MST Region 275
- 8.3.8 Configuring PVSTP 278
- 8.3.8.2 Root Switch 279
- 8.3.8.3 Path-cost 279
- 8.3.8.4 Port Priority 280
- 8.3.9 Root Guard 281
- 8.3.11 Loop Back Detection 282
- 8.3.12 BPDU Configuration 283
- 8.3.12.1 Hello Time 284
- 8.3.12.2 Forward Delay Time 284
- 8.3.12.3 Max Age 285
- 8.3.12.4 BPDU Hop Count 285
- 8.3.12.5 BPDU Filtering 286
- 8.3.12.6 BPDU Guard 286
- 8.3.13 Sample Configuration 288
- VLAN 101 ~ 200 289
- 8.4.1 ERP Mechanism 290
- 8.4.3 ERP Shared Link 294
- 8.4.4.1 ERP Domain Name 295
- 8.4.4.3 Protected VLAN 295
- 8.4.4.4 Control VLAN 296
- 8.4.4.5 ERP Ring Priority 296
- 8.4.5 Selecting the Node 297
- 8.4.6 Protected Activation 297
- 8.4.8 Wait-to-Restore Time 298
- 8.4.9 Learning Disable Time 298
- 8.4.10 Test Packet Interval 299
- 8.4.11 LOTP Hold Off Time 299
- 8.4.12 ERP Trap 300
- 8.5 Loop Detection 301
- 8.6.1 DHCP Server 304
- 8.6.1.1 DHCP Pool Creation 305
- 8.6.1.2 DHCP Subnet 305
- 8.6.1.3 Range of IP Address 305
- 8.6.1.4 Default Gateway 306
- 8.6.1.5 IP Lease Time 306
- 8.6.1.6 DNS Server 307
- 8.6.1.7 Manual Binding 307
- 8.6.1.8 Domain Name 308
- 8.6.1.9 DHCP Server Option 308
- 8.6.1.10 Static Mapping 308
- 8.6.1.13 Authorized ARP 310
- 8.6.2.2 DHCP Class Creation 313
- 8.6.3 DHCP Lease Database 314
- 8.6.4 DHCP Relay Agent 316
- Enters the DHCP option mode 319
- 8.6.6 DHCP Option 82 321
- 8.6.7 DHCP Snooping 324
- 8.6.7.2 DHCP Trust State 325
- 8.6.7.3 DHCP Rate Limit 326
- 8.6.7.4 DHCP Lease Limit 326
- 8.6.7.9 Authorized ARP 329
- 8.6.8 IP Source Guard 332
- 8.6.9 DHCP Client 335
- 8.6.9.5 IP Lease Time 336
- 8.6.9.6 Requesting Option 336
- 8.6.10 DHCP Filtering 337
- DHCP Server A 338
- Client 1 Client 2 338
- Client 3 338
- 8.7 Single IP Management 339
- 8.7.3 Disabling Stacking 340
- NODE Enable 341
- Accesses to a slave switch 341
- NODE: node number 341
- 8.8 Rate Limit 343
- 8.9 Flood Guard 344
- 8.9.2 CPU Flood-Guard 345
- 8.9.3 Port Flood-Guard 346
- 8.10 Storm Control 347
- 8.11 Jumbo Frame Capacity 347
- 8.12 Bandwidth 348
- 9 IP Multicast 349
- 9.1.1 IGMP Basic 350
- 9.1.1.1 Clearing IGMP Entry 351
- 9.1.1.2 IGMP Debug 351
- 9.1.2 IGMP Version 2 352
- 9.1.2.1 IGMP Static Join 353
- 9.1.3 IGMP Version 3 354
- 9.2 Multicast Functions 355
- 9.2.2 IGMP Snooping Basic 357
- 9.2.3 IGMPv2 Snooping 359
- 9.2.4 IGMPv3 Snooping 368
- 9.2.6.1 Enabling MVR 370
- 9.2.6.2 MVR Group 370
- 9.2.6.3 Source/Receiver Port 371
- 9.2.6.4 MVR Helper Address 371
- 9.2.7.1 IGMP Filtering 372
- 9.2.7.2 IGMP Throttling 374
- 10.1 General Upgrade 376
- 10.2 Boot Mode Upgrade 377
- 10.3 FTP Upgrade 380
- FTP Exits the FTP client 381
- 11 Abbreviations 382
- 20 Mason 386
- Irvine, CA 92618 386
- Phone: (949) 679-8000 386
Verwandte Produkte und Handbücher für Netzwerk-Switches SMC TigerAccess
(68 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.068 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern