SMC SMCWBR14S-N4 Betriebsanweisung PDF herunterladen (Seite 34)

HAPTER

| Installing the Gateway Router

Mounting on a Wall

– 34 –

MOUNTING ON A WALL

The Wireless Broadband Router should be mounted only to a wall or wood

surface that is at least 1/2-inch plywood or its equivalent. To mount the

unit on a wall, always use its wall-mounting bracket. The unit must be

mounted with the RJ-45 cable connector oriented upwards to ensure

proper operation.

Figure 8: Wall Mounting

To mount on a wall, follow the instructions below.

1. Mark the position of the two screw holes on the wall. For concrete or

brick walls, you will need to drill holes and insert wall plugs for the

screws.

2. Insert the included screws into the holes, leaving about 0.08~0.12

inches (2-3 mm) clearance from the wall.

3. Line up the two mounting points on the unit with the screws in the wall,

then slide the unit down onto the screws until it is in a secured position.

Mounting Slots

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 126 127

Keine Kommentare

SMC SMCWBR14S-N4 Betriebsanweisung Seite 34