SMC EliteConnect Wireless Bridge Betriebsanweisung PDF herunterladen (Seite 42)

100

101

Hardware Installation

4-4

Be sure to take account of the antenna polarization direction; all antennas in a

link must be mounted with the same polarization.

Mounting to a Wall

Perform the following steps to mount the unit to a wall using the wall-mounting

bracket:

Note: The wall-mounting bracket does not allow the wireless bridge’s intrgrated antenna

to be aligned. It is intended for use with the unit using external antennas.

1. Attach the bracket to a wall with flat side flush against the wall (see following

figure). Position the bracket in the intended location and mark the position of

the four mounting screw holes.

2. Drill four holes in the wall that match the screws and wall plugs included in the

bracket kit, then secure the bracket to the wall.

3. Attach the square mounting plate to the bridge with the supplied screws.

4. Use the included nuts to tightly secure the wireless bridge to the bracket.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 317 318

Kommentare zu diesen Handbüchern

Keine Kommentare

SMC EliteConnect Wireless Bridge Betriebsanweisung Seite 42

Kommentare zu diesen Handbüchern